Starik Carbon Barrel Tuner Tube
Note: These tubes will be special order with a lead time of approx 4-6 weeks, but they are worth the wait!
These tubes have been improved again - the dovetail is now longer, and epoxy bonded to the tube, rather than cut into the carbon - this means you'll need a 4mm block for the rear sight
The tube including the tuner weights about 170g, most of the weight is behind the muzzle
3P shooters have no problem dealing with the weight in front of the muzzle
The tube has a tuner in order to tune the rifle to avoid vertical groups.
The clamp on the barrel is very short (25mm) in order to have the choke the tube has on the barrel, right at the muzzle - this improves accuracy
There are 2 length of tubes: about 19cm and about 32cm
To order please email us with:
The exact barrel diameter, accurate to 1/10mm (e.g. 25.8mm)
The dovetails required (e.g. Anschutz)
The barrel length - in order to measure barrel length, put an empty case in the chamber, close the bolt.
Insert a cleaning rod from the muzzle until it stops. Mark the rod at the muzzle, take the rod out and measure it.
People who bought this item also bought: